Problems with HP printer | |
|
|
Mitglied Posts: 70 Registered: 2008-08-24 | Hi guys,
I noticed my printer doesn't work with paldo unstable. I managed to install it from the GNOME Print Manager, CUPS' web interface and also hp-setup but either way it doesn't work.
I enabled the debug LogLevel in CUPS and here it is.
It seems like it doesn't find "hpijs"... shouldn't it be deployed with hplip? .............................. Running GNU/Linux Paldo 1.18 (unstable). Rock my box! |
|
|
|
|
|
Re: Problems with HP printer | |
|
|
Mitglied Posts: 70 Registered: 2008-08-24 | I think I found the source of the problem. The spec file doesn't include the "--enable-hpijs-install" which is NOT installed by default. Here is the "configure --help" output:
Code | [In neuem Fenster öffnen] | | `configure' configures HP Linux Imaging and Printing 3.9.6b to adapt to many kinds of systems.
Usage: ./configure [OPTION]... [VAR=VALUE]...
To assign environment variables (e.g., CC, CFLAGS...), specify them as
VAR=VALUE. See below for descriptions of some of the useful variables.
Defaults for the options are specified in brackets.
Configuration:
-h, --help display this help and exit
--help=short display options specific to this package
--help=recursive display the short help of all the included packages
-V, --version display version information and exit
-q, --quiet, --silent do not print `checking...' messages
--cache-file=FILE cache test results in FILE [disabled]
-C, --config-cache alias for `--cache-file=config.cache'
-n, --no-create do not create output files
--srcdir=DIR find the sources in DIR [configure dir or `..']
Installation directories:
--prefix=PREFIX install architecture-independent files in PREFIX
[/usr/local]
--exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
[PREFIX]
By default, `make install' will install all the files in
`/usr/local/bin', `/usr/local/lib' etc. You can specify
an installation prefix other than `/usr/local' using `--prefix',
for instance `--prefix=$HOME'.
For better control, use the options below.
Fine tuning of the installation directories:
--bindir=DIR user executables [EPREFIX/bin]
--sbindir=DIR system admin executables [EPREFIX/sbin]
--libexecdir=DIR program executables [EPREFIX/libexec]
--sysconfdir=DIR read-only single-machine data [PREFIX/etc]
--sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
--localstatedir=DIR modifiable single-machine data [PREFIX/var]
--libdir=DIR object code libraries [EPREFIX/lib]
--includedir=DIR C header files [PREFIX/include]
--oldincludedir=DIR C header files for non-gcc [/usr/include]
--datarootdir=DIR read-only arch.-independent data root [PREFIX/share]
--datadir=DIR read-only architecture-independent data [DATAROOTDIR]
--infodir=DIR info documentation [DATAROOTDIR/info]
--localedir=DIR locale-dependent data [DATAROOTDIR/locale]
--mandir=DIR man documentation [DATAROOTDIR/man]
--docdir=DIR documentation root [DATAROOTDIR/doc/hplip]
--htmldir=DIR html documentation [DOCDIR]
--dvidir=DIR dvi documentation [DOCDIR]
--pdfdir=DIR pdf documentation [DOCDIR]
--psdir=DIR ps documentation [DOCDIR]
Program names:
--program-prefix=PREFIX prepend PREFIX to installed program names
--program-suffix=SUFFIX append SUFFIX to installed program names
--program-transform-name=PROGRAM run sed PROGRAM on installed program names
System types:
--build=BUILD configure for building on BUILD [guessed]
--host=HOST cross-compile to build programs to run on HOST [BUILD]
Optional Features:
--disable-option-checking ignore unrecognized --enable/--with options
--disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
--enable-FEATURE[=ARG] include FEATURE [ARG=yes]
--enable-static[=PKGS] build static libraries [default=no]
--enable-shared[=PKGS] build shared libraries [default=yes]
--enable-fast-install[=PKGS]
optimize for fast installation [default=yes]
--disable-dependency-tracking speeds up one-time build
--enable-dependency-tracking do not reject slow dependency extractors
--disable-libtool-lock avoid locking (might break parallel builds)
--enable-doc-build enable documentation build (default=yes)
--enable-hpijs-only-build enable hpijs only build (default=no)
--enable-lite-build enable lite build, print & scan only (default=no)
--enable-hpijs-install enable hpijs install (default=no)
--enable-hpcups-install enable hpcups install (default=yes)
--enable-network-build enable network build (default=yes)
--enable-pp-build enable parallel port build (default=no)
--enable-scan-build enable scanner build (default=yes)
--enable-gui-build enable gui build (default=yes)
--enable-fax-build enable fax build (default=yes)
--enable-dbus-build enable dbus build (default=yes)
--enable-cups11-build enable cups 1.1.x build (default=no)
--enable-shadow-build enable shadow build (default=no)
--enable-foomatic-ppd-install enable foomatic static ppd install (default=no), uses hpppddir
--enable-foomatic-drv-install enable foomatic dynamic ppd install (default=no), uses drvdir and hpppddir
--enable-cups-drv-install enable cups dynamic ppd install (default=yes), uses drvdir and hpppddir
--enable-cups-ppd-install enable cups static ppd install (default=no), uses hpppddir
--enable-foomatic-rip-hplip-install enable foomatic-rip-hplip install (default=no), uses cupsfilterdir
--enable-qt4 enable qt4 (default=yes)
--enable-qt3 enable qt3 (default=no)
--enable-policykit enable PolicyKit (default=no)
Optional Packages:
--with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
--without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
--with-pic try to use only PIC/non-PIC objects [default=use
both]
--with-gnu-ld assume the C compiler uses GNU ld [default=no]
--with-cupsbackenddir=DIR
set cups backend install directory
default=/usr/lib/cups/backend
--with-cupsfilterdir=DIR
set cups filter install directory
default=/usr/lib/cups/filter
--with-icondir=DIR set hplip.desktop install directory
default=/usr/share/applications
--with-systraydir=DIR set hplip-systray.desktop install directory
default=/etc/xdg/autostart
--with-hpppddir=DIR set hp ppd install directory
default=datadir/ppd/HP
--with-docdir=DIR set hplip documentation directory
default=datadir/doc
--with-drvdir=DIR set cups drv install directory
default=datadir/cups/drv/hp
Some influential environment variables:
CC C compiler command
CFLAGS C compiler flags
LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a
nonstandard directory <lib dir>
LIBS libraries to pass to the linker, e.g. -l<library>
CPPFLAGS C/C++/Objective C preprocessor flags, e.g. -I<include dir> if
you have headers in a nonstandard directory <include dir>
CPP C preprocessor
CXX C++ compiler command
CXXFLAGS C++ compiler flags
CXXCPP C++ preprocessor
PYTHON Python interpreter/compiler command
PYTHONINCLUDEDIR
path to Python.h C header file
PKG_CONFIG path to pkg-config utility
DBUS_CFLAGS C compiler flags for DBUS, overriding pkg-config
DBUS_LIBS linker flags for DBUS, overriding pkg-config
Use these variables to override the choices made by `configure' or to help
it to find libraries and programs with nonstandard names/locations.
Report bugs to <3.9.6b.4>. |
The spec file should be fixed, adding the configure flag I mentioned before. .............................. Running GNU/Linux Paldo 1.18 (unstable). Rock my box! |
|
|
|
|
|