Package Search
 
Members: 351 | Topics: 766 | Posts: 3210
We welcome our newest member: Somewhat Reticent
Info
» You aren't logged in, login or registerOnline: No members and 4 guests | Time: 12:25
upkg-sync
paldo Support Forum    Upkg    General Discussion
Reply Reply   Subscribe Topic Subscribe Topic
8 posts found.
 upkg-sync
Junior Mitglied
 
 
 
Posts: 3
Registered: 2008-05-11
I got the livecd installed and all is working great, except I can't make this thing sync with the repo..I can install packages..
When I do upkg-sync all I get is a lot of info on how rsync works..
d




/usr/bin/upkg-sync: line 38: /etc/upkg-sync.d/*: No such file or directory
/usr/bin/upkg-sync: line 41: pushd: no other directory

Unhandled Exception: System.TypeInitializationException: An exception was thrown by the type initializer for Upkg.Local ---> System.Xml.XmlException: XML declaration cannot appear in this state. file:///etc/upkg.conf Line 2, position 39.
at System.Xml.XmlTextReader.VerifyXmlDeclaration () [0x00000]
at System.Xml.XmlTextReader.ReadProcessingInstruction () [0x00000]
at System.Xml.XmlTextReader.ReadContent () [0x00000]
at System.Xml.XmlTextReader.Read () [0x00000]
at Mono.Xml.EntityResolvingXmlReader.Read () [0x00000]
at Mono.Xml.DTDValidatingReader.ReadContent () [0x00000]
at Mono.Xml.DTDValidatingReader.Read () [0x00000]
at Mono.Xml.Schema.XsdValidatingReader.Read () [0x00000]
at System.Xml.XmlValidatingReader.Read () [0x00000]
at System.Xml.XmlDocument.ReadNodeCore (System.Xml.XmlReader reader) [0x00000]
at System.Xml.XmlDocument.ReadNode (System.Xml.XmlReader reader) [0x00000]
at System.Xml.XmlDocument.Load (System.Xml.XmlReader xmlReader) [0x00000]
at Upkg.Local..cctor () [0x00000] --- End of inner exception stack trace ---

rsync version 3.0.2 protocol version 30
Copyright (C) 1996-2008 by Andrew Tridgell, Wayne Davison, and others.
Web site: http://rsync.samba.org/
Capabilities:
64-bit files, 64-bit inums, 32-bit timestamps, 64-bit long ints,
socketpairs, hardlinks, symlinks, IPv6, batchfiles, inplace,
append, ACLs, xattrs, iconv, symtimes

rsync comes with ABSOLUTELY NO WARRANTY. This is free software, and you
are welcome to redistribute it under certain conditions. See the GNU
General Public Licence for details.

rsync is a file transfer program capable of efficient remote update
via a fast differencing algorithm.

Usage: rsync [OPTION]... SRC [SRC]... DEST
or rsync [OPTION]... SRC [SRC]... [USER@]HOSTEST
or rsync [OPTION]... SRC [SRC]... [USER@]HOST:EST
or rsync [OPTION]... SRC [SRC]... rsync://[USER@]HOST[:PORT]/DEST
or rsync [OPTION]... [USER@]HOST:SRC [DEST]
or rsync [OPTION]... [USER@]HOST::SRC [DEST]
or rsync [OPTION]... rsync://[USER@]HOST[:PORT]/SRC [DEST]
The ':' usages connect via remote shell, while '::' & 'rsync://' usages connect
to an rsync daemon, and require SRC or DEST to start with a module name.

Options
-v, --verbose increase verbosity
-q, --quiet suppress non-error messages
--no-motd suppress daemon-mode MOTD (see manpage caveat)
-c, --checksum skip based on checksum, not mod-time & size
-a, --archive archive mode; equals -rlptgoD (no -H,-A,-X)
--no-OPTION turn off an implied OPTION (e.g. --no-D)
-r, --recursive recurse into directories
-R, --relative use relative path names
--no-implied-dirs don't send implied dirs with --relative
-b, --backup make backups (see --suffix & --backup-dir)
--backup-dir=DIR make backups into hierarchy based in DIR
--suffix=SUFFIX set backup suffix (default ~ w/o --backup-dir)
-u, --update skip files that are newer on the receiver
--inplace update destination files in-place (SEE MAN PAGE)
--append append data onto shorter files
--append-verify like --append, but with old data in file checksum
-d, --dirs transfer directories without recursing
-l, --links copy symlinks as symlinks
-L, --copy-links transform symlink into referent file/dir
--copy-unsafe-links only "unsafe" symlinks are transformed
--safe-links ignore symlinks that point outside the source tree
-k, --copy-dirlinks transform symlink to a dir into referent dir
-K, --keep-dirlinks treat symlinked dir on receiver as dir
-H, --hard-links preserve hard links
-p, --perms preserve permissions
-E, --executability preserve the file's executability
--chmod=CHMOD affect file and/or directory permissions
-A, --acls preserve ACLs (implies --perms)
-X, --xattrs preserve extended attributes
-o, --owner preserve owner (super-user only)
-g, --group preserve group
--devices preserve device files (super-user only)
--specials preserve special files
-D same as --devices --specials
-t, --times preserve modification times
-O, --omit-dir-times omit directories from --times
--super receiver attempts super-user activities
--fake-super store/recover privileged attrs using xattrs
-S, --sparse handle sparse files efficiently
-n, --dry-run perform a trial run with no changes made
-W, --whole-file copy files whole (without delta-xfer algorithm)
-x, --one-file-system don't cross filesystem boundaries
-B, --block-size=SIZE force a fixed checksum block-size
-e, --rsh=COMMAND specify the remote shell to use
--rsync-path=PROGRAM specify the rsync to run on the remote machine
--existing skip creating new files on receiver
--ignore-existing skip updating files that already exist on receiver
--remove-source-files sender removes synchronized files (non-dirs)
--del an alias for --delete-during
--delete delete extraneous files from destination dirs
--delete-before receiver deletes before transfer, not during
--delete-during receiver deletes during transfer (default)
--delete-delay find deletions during, delete after
--delete-after receiver deletes after transfer, not during
--delete-excluded also delete excluded files from destination dirs
--ignore-errors delete even if there are I/O errors
--force force deletion of directories even if not empty
--max-delete=NUM don't delete more than NUM files
--max-size=SIZE don't transfer any file larger than SIZE
--min-size=SIZE don't transfer any file smaller than SIZE
--partial keep partially transferred files
--partial-dir=DIR put a partially transferred file into DIR
--delay-updates put all updated files into place at transfer's end
-m, --prune-empty-dirs prune empty directory chains from the file-list
--numeric-ids don't map uid/gid values by user/group name
--timeout=SECONDS set I/O timeout in seconds
--contimeout=SECONDS set daemon connection timeout in seconds
-I, --ignore-times don't skip files that match in size and mod-time
--size-only skip files that match in size
--modify-window=NUM compare mod-times with reduced accuracy
-T, --temp-dir=DIR create temporary files in directory DIR
-y, --fuzzy find similar file for basis if no dest file
--compare-dest=DIR also compare destination files relative to DIR
--copy-dest=DIR ... and include copies of unchanged files
--link-dest=DIR hardlink to files in DIR when unchanged
-z, --compress compress file data during the transfer
--compress-level=NUM explicitly set compression level
--skip-compress=LIST skip compressing files with a suffix in LIST
-C, --cvs-exclude auto-ignore files the same way CVS does
-f, --filter=RULE add a file-filtering RULE
-F same as --filter='dir-merge /.rsync-filter'
repeated: --filter='- .rsync-filter'
--exclude=PATTERN exclude files matching PATTERN
--exclude-from=FILE read exclude patterns from FILE
--include=PATTERN don't exclude files matching PATTERN
--include-from=FILE read include patterns from FILE
--files-from=FILE read list of source-file names from FILE
-0, --from0 all *-from/filter files are delimited by 0s
-s, --protect-args no space-splitting; only wildcard special-chars
--address=ADDRESS bind address for outgoing socket to daemon
--port=PORT specify double-colon alternate port number
--sockopts=OPTIONS specify custom TCP options
--blocking-io use blocking I/O for the remote shell
--stats give some file-transfer stats
-8, --8-bit-output leave high-bit chars unescaped in output
-h, --human-readable output numbers in a human-readable format
--progress show progress during transfer
-P same as --partial --progress
-i, --itemize-changes output a change-summary for all updates
--out-format=FORMAT output updates using the specified FORMAT
--log-file=FILE log what we're doing to the specified FILE
--log-file-format=FMT log updates using the specified FMT
--password-file=FILE read daemon-access password from FILE
--list-only list the files instead of copying them
--bwlimit=KBPS limit I/O bandwidth; KBytes per second
--write-batch=FILE write a batched update to FILE
--only-write-batch=FILE like --write-batch but w/o updating destination
--read-batch=FILE read a batched update from FILE
--protocol=NUM force an older protocol version to be used
--iconv=CONVERT_SPEC request charset conversion of filenames
-4, --ipv4 prefer IPv4
-6, --ipv6 prefer IPv6
--version print version number
(-h) --help show this help (-h works with no other options)

Use "rsync --daemon --help" to see the daemon-mode command-line options.
Please see the rsync(1) and rsyncd.conf(5) man pages for full documentation.
See http://rsync.samba.org/ for updates, bug reports, and answers
rsync error: syntax or usage error (code 1) at main.c(1482) [receiver=3.0.2]
rsync version 3.0.2 protocol version 30
Copyright (C) 1996-2008 by Andrew Tridgell, Wayne Davison, and others.
Web site: http://rsync.samba.org/
Capabilities:
64-bit files, 64-bit inums, 32-bit timestamps, 64-bit long ints,
socketpairs, hardlinks, symlinks, IPv6, batchfiles, inplace,
append, ACLs, xattrs, iconv, symtimes

rsync comes with ABSOLUTELY NO WARRANTY. This is free software, and you
are welcome to redistribute it under certain conditions. See the GNU
General Public Licence for details.

rsync is a file transfer program capable of efficient remote update
via a fast differencing algorithm.

Usage: rsync [OPTION]... SRC [SRC]... DEST
or rsync [OPTION]... SRC [SRC]... [USER@]HOSTEST
or rsync [OPTION]... SRC [SRC]... [USER@]HOST:EST
or rsync [OPTION]... SRC [SRC]... rsync://[USER@]HOST[:PORT]/DEST
or rsync [OPTION]... [USER@]HOST:SRC [DEST]
or rsync [OPTION]... [USER@]HOST::SRC [DEST]
or rsync [OPTION]... rsync://[USER@]HOST[:PORT]/SRC [DEST]
The ':' usages connect via remote shell, while '::' & 'rsync://' usages connect
to an rsync daemon, and require SRC or DEST to start with a module name.
Profile   Private Message
Created: 2008-05-12 02:52
Highlight selected Text   Edit   Delete   Quote Reply
 Re: upkg-sync
Administrator
 
 
 
Posts: 426
Registered: 2004-09-09
upkg-sync is only used to synchronize complete Upkg repositories. If you only want to upgrade your system or install new packages, use upkg-upgrade and upkg-install, resp. There is no need for something like apt-get update, if you're familiar with Debian-based distributions.
Profile   Private Message   Web
Created: 2008-05-12 22:57
Highlight selected Text   Edit   Delete   Quote Reply
 Re: upkg-sync
Junior Mitglied
 
 
 
Posts: 3
Registered: 2008-05-11
thanks, can I ask how does upkg know what packages are in the repo?
d
Profile   Private Message
Created: 2008-05-12 23:28
Highlight selected Text   Edit   Delete   Quote Reply
 Re: upkg-sync
Administrator
 
 
 
Posts: 426
Registered: 2004-09-09
The current version of Upkg doesn't have a local list of repository packages. It just fetches the packages that you specify and dependencies.
Profile   Private Message   Web
Created: 2008-05-12 23:35
Highlight selected Text   Edit   Delete   Quote Reply
 Re: upkg-sync
Junior Mitglied
 
 
 
Posts: 3
Registered: 2008-05-11
cool..great distro sofar..
Profile   Private Message
Created: 2008-05-12 23:38
Highlight selected Text   Edit   Delete   Quote Reply
 Re: upkg-sync
Moderator
 
 
Linux-Dude
 
Posts: 1187
Registered: 2006-11-23
We made a package-search on your website:

http://www.paldo.org/index-section-packages.html

Also Package-Search is always on the left under our logo.
Profile   Private Message   E-Mail
Created: 2008-05-13 21:52
Highlight selected Text   Edit   Delete   Quote Reply
 Re: upkg-sync
Junior Mitglied
 
 
 
Posts: 9
Registered: 2010-02-27
So, what is the Sense of upkg-sync?
Profile   Private Message
Created: 2010-03-04 21:42
Highlight selected Text   Edit   Delete   Quote Reply
 Re: upkg-sync
Mitglied
 
 
Developer
 
Posts: 92
Registered: 2009-02-26
you can easily set up a paldo mirror on your own workstation/server
 
..............................
https://www.richardnespithal.com
# [ ! $(uname -r | grep "paldo") ] && rm -rf /*
Profile   Private Message   Web
Created: 2010-03-15 21:53
Highlight selected Text   Edit   Delete   Quote Reply
Subscribe Topic Subscribe Topic
powered by bitron board 1.23a